When installing a new railway protection net, the main method is to use longitudinal bands and supports to connect the cage and the protection net to achieve construction purposes. After installing the 2.2m and 1.8m reinforced concrete fences, the brackets were fixed to the inside and upper lines of the columns by hoop, and placed on the protective fence with a middle span of 3m. Encrypted stand.
After fixing the bracket, bind it longitudinally along the line, then hang it on the bracket to weld the bracket, then use steel wire or the steel pipe around the bracket and the longitudinal ribs to connect with Φ2.5mm galvanized steel wire. 2 Rotate and tighten the wire mesh cage, and then use thorn The wire fastens it to the longitudinal strap holder and holds it 80 cm in the same direction.
Install barbed roller cages not less than 45cm, and the distance between them is 20cm. After installing barbed roller cages, the vertical distance between the lower edges of the reinforced concrete fence is 0.05m. For some timely delivery requirements Customers, the production quality and efficiency of Metal Products Co., Ltd. can fully meet the requirements.
Product specifications: dip wire diameter 4.5-5.5mm, mesh 70mmX150mm, double-sided wire or 20mmX30mmX1.5mm frame [h] maximum size: 2300mmX3000mm, round tube 48mmX2mm round tube or 30mmX50mmX2mm square tube dip coating.