The main points of the selection of screw conveyor? Conveying capacity: The conveying capacity of the screw feeder refers to the amount of materials conveyed per unit time. When transporting bulk materials, it is calculated based on the mass or volume of the material transported per hour; when transporting finished products, it is calculated based on the number of units transported per hour. When combined with linear vibration screens, rotary vibration screens, ultrasonic vibration screens, etc. when using it.
The feed of the vibrating screen should be calculated to control the delivery. In order to correctly design the type of conveyor, most conveyors need to consider whether they can be used with other production equipment before designing and manufacturing. Conveying speed: Higher conveying speed can increase the conveying capacity. When the conveyor is used as a tractor and the conveying length is large, the conveying speed gradually increases.
However, high speed belt conveyors should pay attention to vibration, noise, starting, braking and other issues. For conveyors using a chain as a tractor, the conveying speed should not be too high to prevent an increase in dynamic load. At the same time, according to the requirements of the production process, the conveying speed of the feeder operated by the process is determined.
Component size: Conveyor component size includes conveyor bandwidth, board width, funnel volume, pipe diameter and container size. The dimensions of these components directly affect the conveying capacity, conveying length and inclination of the screw feeder: the length and inclination of the conveying line directly affect the total resistance and required power of the conveyor belt. There are many types of conveyors, with direct parallel feed, and some have a certain inclination angle, so the use conditions should be explained when selecting the screw feeder.